|
| ブランド名: | BLUWAT |
| モデル番号: | ブルーフロック |
| MOQ: | 1000KGS |
| 価格: | 交渉可能 |
| 納期: | 7～10営業日以内 |
| 支払い条件: | D/A、D/P、L/C、T/T、ウェスタンユニオン |
BLUFLOC HA7525 Anionic Polyacrylamide is a water soluble polymer powder designed for water based drilling fluid systems. With high molecular weight and anionic charge, it helps improve drilling mud viscosity, rheology control, cuttings suspension, lubrication performance, fluid loss control and shale stabilization.
BLUFLOC HA7525 Anionic Polyacrylamide is a high molecular weight PAM powder used in oil and gas drilling applications. It can help improve the rheology of water based drilling fluids, enhance viscosity, support cuttings suspension and reduce the instability caused by shale swelling and dispersion.
In oil drilling operations, unstable formations, poor mud viscosity, excessive fluid loss and weak shale inhibition may cause borehole instability, higher drilling risk and increased treatment cost. HA7525 is used as a drilling fluid additive to improve drilling mud performance and support more stable drilling operation.
HA7525 is suitable for water based drilling mud systems, oilfield drilling fluid preparation, shale stabilization, borehole support, drilling mud lubrication, fluid loss control and selected enhanced oil recovery polymer applications.
Molecular weight grade up to 25 million, suitable for applications requiring strong viscosity building and suspension performance.
Designed for water based drilling fluid systems where anionic polymer performance is required.
Helps improve drilling mud viscosity, flow behavior and overall mud system stability.
Supports shale inhibition performance and helps reduce shale swelling and dispersion tendency.
Helps improve drilling mud structure and supports better mud cake quality in water based systems.
Improves solid carrying capacity and helps suspend drill cuttings during mud circulation.
The polymer solution can improve lubrication performance and help reduce friction during drilling operation.
Low dosage requirement helps reduce treatment cost while maintaining stable drilling mud performance.
| Item | Specification |
|---|---|
| Product Name | HA7525 Anionic Polyacrylamide |
| Product Type | High Molecular Weight PAM Powder |
| Ionic Type | Anionic |
| Appearance | Off White Granular Powder |
| Particle Size | 20 to 100 Mesh |
| Molecular Weight Grade | Up to 25 Million |
| Anionic Degree | 5 to 100 Percent Range |
| Solid Content | Minimum 89 Percent |
| Bulk Density | About 0.8 |
| Residual Monomer | Max 0.05 Percent |
| Recommended Working Concentration | 0.1 to 0.5 Percent |
| pH of 1 Percent Solution | Around 6 to 8 for anionic type |
| Storage Temperature | 0 to 35 Degree C |
| Shelf Life | 2 Years |
| Packaging | 25 kg bag or 750 kg big bag |
HA7525 can be used as a polymer additive in water based drilling fluid systems. It helps improve mud viscosity, carrying capacity and general drilling fluid stability.
In formations containing active shale or clay, water invasion may cause swelling, dispersion and borehole instability. HA7525 helps improve drilling fluid stability and supports shale inhibition performance.
HA7525 can help improve the mud system structure and reduce excessive filtrate loss, supporting better borehole protection and mud cake quality.
The polymer solution formed by HA7525 can improve lubrication in water based drilling mud and help reduce friction between drill pipe, mud and formation.
HA7525 is suitable for drilling systems that require higher viscosity and better rheological control. It supports smoother drilling fluid circulation.
High molecular weight anionic PAM can improve the ability of drilling fluid to suspend and carry cuttings, especially where fine solid particles require better transport control.
For selected enhanced oil recovery applications, high molecular weight anionic polyacrylamide can be used to improve water viscosity and support mobility control.
HA7525 helps optimize the performance of water based drilling mud systems where viscosity, stability, lubrication and shale control are important.
Final product selection should be based on mud formulation, salinity, temperature, shale activity and field operating conditions.
HA7525 is selected for oil drilling applications because it combines high molecular weight, anionic charge and good water solubility. These properties allow it to work as a viscosifier, shale stabilization aid, fluid loss control support polymer and drilling mud performance improver.
Compared with low molecular weight polymers, HA7525 provides stronger viscosity building performance at relatively low dosage. This makes it suitable for drilling fluid systems where efficient performance and cost control are both important.
For drilling mud systems with unstable viscosity, weak cuttings suspension, shale swelling risk or high fluid loss, HA7525 can be considered as a high molecular weight anionic polymer additive for performance improvement.
The actual dosage depends on drilling fluid formulation, water quality, mud density, salinity, temperature, shale activity and the required viscosity level.
For best performance, laboratory testing or pilot testing is recommended before field use. Bluwat can provide product selection support and dosing suggestions according to the customer drilling mud system and field requirements.
Bluwat Chemicals is a professional manufacturer and exporter of polyacrylamide and water treatment chemicals with more than 25 years of production experience.
We provide stable quality, factory direct supply, technical support and customized polymer selection for different oilfield and industrial applications.
Anionic polyacrylamide, cationic polyacrylamide, nonionic polyacrylamide and emulsion polyacrylamide are available.
Different molecular weight and charge density options can be selected according to drilling fluid, EOR, wastewater treatment, mining and papermaking applications.
Stable production, consistent quality and flexible packaging support for international customers.
Product selection support, dosing guidance and testing recommendations can be provided according to field conditions.
HA7525 is mainly used as a high molecular weight anionic polyacrylamide for oil drilling fluid additive, shale stabilization, fluid loss control, lubrication improvement, viscosity control and selected EOR polymer applications.
Yes. HA7525 is suitable for water based drilling mud systems where viscosity improvement, borehole stability and mud performance support are needed.
HA7525 is a high molecular weight anionic PAM grade with molecular weight up to 25 million.
The recommended dissolving concentration is 0.1 to 0.5 percent.
Normally it requires about 1 hour of agitation to fully dissolve, depending on water temperature, water quality and mixing conditions.
Yes. HA7525 can help improve drilling fluid stability and support shale stabilization in water based drilling mud systems.
HA7525 can be considered for selected EOR polymer applications, especially where high molecular weight anionic polymer is required. Final selection should be based on reservoir temperature, salinity and field testing.
Yes. Bluwat can provide product selection support, dosing recommendations, testing guidance and customized PAM solutions according to different oilfield and industrial applications.
Bluwat can help select suitable anionic polyacrylamide grades according to drilling mud formulation, water quality, salinity, temperature, shale activity and required viscosity level. HA7525 is available for oilfield drilling fluid additive, shale stabilization, fluid loss control and selected EOR related polymer applications.
english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
indonesia
tiếng Việt
ไทย
বাংলা
فارسی
polski