|
| ブランド名: | BLUWAT |
| モデル番号: | ブルーフロック |
| MOQ: | 1000KGS |
| 価格: | 交渉可能 |
| 納期: | 7～10営業日以内 |
| 支払い条件: | D/A、D/P、L/C、T/T、ウェスタンユニオン |
BLUFLOC High Viscosity Polyacrylamide Powder is designed for oilfield drilling fluid applications where stable viscosity, good suspension capacity and borehole wall protection are required. With high molecular weight and minimum 89 percent solid content, it forms a viscous polymer solution after proper dissolution and supports the performance of water based drilling mud systems.
BLUFLOC High Viscosity Polyacrylamide Powder is designed for oilfield drilling fluid applications where stable viscosity, good suspension capacity and borehole wall protection are required. With high molecular weight and minimum 89 percent solid content, this polyacrylamide powder can form a viscous polymer solution after proper dissolution and support the performance of water based drilling mud systems.
In oil drilling operations, drilling fluid must carry cuttings, cool and lubricate drilling tools, control fluid loss and help protect the borehole wall. If the drilling fluid viscosity is too low or unstable, cuttings may settle, mud circulation may become less efficient and the borehole may become unstable.
BLUFLOC high viscosity PAM helps improve drilling mud rheology and supports a more stable drilling process in water based drilling fluid systems.
This product is suitable for drilling fluid thickening, shale stabilization, borehole stability, lubrication improvement, fluid loss control support and oilfield mud treatment.
Designed for drilling fluid thickening where stronger viscosity and more stable mud rheology are required.
High active polymer content supports stable product quality, consistent dosing and reliable solution preparation.
High molecular weight anionic polyacrylamide grade is available for oilfield drilling fluid applications.
Suitable for water based drilling mud systems requiring viscosity improvement and rheology control.
Supports borehole wall protection and helps reduce instability caused by weak mud performance.
Improves cuttings suspension and carrying capacity during drilling fluid circulation.
Helps improve lubrication in drilling mud circulation and supports smoother drilling operation.
Effective at low dosage levels, helping reduce total chemical use and field operation cost.
| Item | Specification |
|---|---|
| Product Name | High Viscosity Polyacrylamide Powder |
| Brand | BLUFLOC |
| Recommended Grade | HA7525 or Customized Anionic PAM Grade |
| Product Type | Water Soluble Polymer Powder |
| Ionic Type | Mainly Anionic for Oil Drilling Fluid |
| Appearance | Off White Granular Powder |
| Particle Size | 20 to 100 Mesh |
| Molecular Weight Range | 5 to 25 Million for Anionic Type |
| Anionic Degree | 5 to 100 Percent Range |
| Solid Content | Minimum 89 Percent |
| Bulk Density | About 0.8 |
| Residual Monomer | Max 0.05 Percent |
| Recommended Working Concentration | 0.1 to 0.5 Percent |
| pH of 1 Percent Solution | Around 6 to 8 for Anionic Type |
| Storage Temperature | 0 to 35 Degree C |
| Shelf Life | 2 Years |
| Package | 25 kg Bag or 750 kg Big Bag |
BLUFLOC high viscosity polyacrylamide powder is used to increase the viscosity of water based drilling fluids. Proper viscosity helps the drilling mud carry cuttings, maintain stable circulation and improve the overall performance of the mud system.
High viscosity PAM helps improve the structure and stability of drilling fluid, supporting better borehole wall protection and reducing the risk of formation collapse caused by unstable mud performance.
When water based drilling fluid enters active shale formations, shale swelling and dispersion may occur. BLUFLOC high viscosity PAM helps improve mud system stability and supports shale stabilization performance.
High viscosity drilling mud helps suspend and transport drill cuttings more effectively. BLUFLOC PAM improves the carrying capacity of the fluid system and helps reduce cuttings settling during circulation.
The polymer solution formed by polyacrylamide can improve lubrication in water based drilling mud, supporting smoother drilling operation and reducing friction during circulation.
Although this product page mainly focuses on thickening and borehole stability, high viscosity PAM can also support fluid loss control by improving mud structure and helping form a more stable fluid system.
BLUFLOC polyacrylamide can also be used in selected oilfield mud treatment and wastewater clarification applications where solid liquid separation and suspended solids settling are required.
This product is suitable for water based mud systems that require viscosity improvement, cuttings suspension, lubrication support and borehole wall protection.
Bluwat can recommend HA7525 or customized anionic PAM grades according to mud formulation, target viscosity and field operating conditions.
The minimum 89 percent solid content indicates a high active polymer content in the powder product. For oilfield buyers, this means more consistent dosing, stable solution preparation and reliable performance in drilling fluid formulation.
A high solid content PAM powder is easier to calculate during field dosing and can help reduce transportation and storage cost compared with lower active content materials.
After proper dissolution, high molecular weight polyacrylamide forms a viscous polymer solution. When added into the drilling fluid system, it helps improve viscosity, suspension, rheology and mud stability.
This is especially useful in drilling conditions where the mud system needs stronger carrying capacity, better borehole support and more stable circulation performance.
The actual dosage depends on mud formulation, water quality, mud density, temperature, salinity, shale activity, target viscosity and drilling conditions.
Laboratory test or field trial is recommended before large scale use. For oilfield drilling fluid thickening, the product should be selected according to the required viscosity, compatibility with other mud additives and field operating conditions.
Bluwat can provide technical support and product selection recommendations according to customer requirements.
Minimum 89 percent solid content supports stable field dosing and reliable product performance.
Helps improve drilling fluid thickening, cuttings suspension and mud circulation stability.
High molecular weight anionic PAM grades are available for oilfield drilling fluid systems.
Suitable for drilling fluid thickening, borehole stability, shale stabilization and lubrication support.
20 to 100 mesh granular powder supports practical industrial solution preparation.
Effective at low dosage levels and suitable for cost conscious oilfield applications.
Factory direct supply from China with stable quality for repeated industrial use.
Customized molecular weight and anionic degree can be provided according to different mud systems.
Bluwat Chemicals is a professional manufacturer and exporter of polyacrylamide and water treatment chemicals with more than 25 years of manufacturing experience.
Bluwat supplies anionic polyacrylamide, cationic polyacrylamide, nonionic polyacrylamide and emulsion polyacrylamide for oilfield drilling, EOR, industrial wastewater treatment, mining, papermaking, sludge dewatering and other applications.
For oilfield customers, Bluwat can provide product selection support, technical data, sample support and customized PAM grades according to different drilling fluid requirements.
It is used as a drilling fluid additive to improve mud viscosity, cuttings suspension, borehole stability, shale stabilization and drilling fluid performance.
The solid content is minimum 89 percent.
Yes. High viscosity polyacrylamide powder is suitable for water based drilling fluid systems where thickening and rheology improvement are required.
Yes. By improving mud viscosity, suspension and stability, it can support borehole wall protection and help reduce instability in sensitive formations.
Yes. It can support shale stabilization in water based drilling mud systems, especially when used as part of a proper drilling fluid formulation.
The recommended dissolving concentration is 0.1 to 0.5 percent.
Normally it takes about 1 hour under proper agitation conditions.
The standard package is 25 kg bag. 750 kg big bag is also available.
Yes. Bluwat can recommend HA7525 or other customized PAM grades according to drilling mud requirements, target viscosity and field conditions.
BLUFLOC High Viscosity Polyacrylamide Powder supports water based drilling mud thickening, cuttings suspension, borehole stability, shale stabilization and lubrication improvement. Bluwat can provide stable factory supply, technical documents, sample support and customized PAM grade selection for oilfield customers.
english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
indonesia
tiếng Việt
ไทย
বাংলা
فارسی
polski